Bow shackle square head

The widening of the bow makes it easier to accommodate the sling or hook of choice, and can improve mobility if necessary.

The square design of the pin head is difficult to tamper if required for the lifting structure for safety purposes.

TIPS: For correct assembly, the hook must always be attached to the shackle bolt and the sling, the wire or rope must be attached to the shackle bow. Assembly must never be carried out in reverse order. Although lateral loads must be avoided, its bow design allows for special applications at 45° and 90°. The following SWL load reductions must be taken into account for these cases: 45° reduction to 70 % and 90° reduction to 50 %. In order not to compromise safety, the SWL established for each size must never be exceeded.