CL Shaft clip
Mechanical zinc plated Cr3 or Phosphated
The CL shaft clip is particularly useful for use with small diameter shafts as it can handle quite considerable axial forces.
The design of the inside edge allows the CL clip to reach the very bottom of the groove, meaning that unnecessary wear and tear caused by movement due to a poor fit can be avoided.
The frontal flap forms a convenient grip which makes CL much easier to mount than other more conventional shaft clips.
What finish do you need?
Material:
Spring steel
Hardness:
HV 450 ÷510 / HRC 45 ÷50
Finish:
Mechanical zinc plated Cr3 (∙) or phosphated (∙∙)
| Part number | Denomination | Ø d1 ± 0.1 | Ø d2 | a ± 0.3 | b ± 0.3 | c ± 0.3 | s | m | Box Quantity | Outer Box Quantity |
|---|---|---|---|---|---|---|---|---|---|---|
| 02280821 | • CL 5 | 5 | 6 | 10.6 | 11.2 | 3.7 | 0.5 | 0.74 | 1000 | 16000 |
| 02280354 | • • CL 6 | 6 | 7 | 11.5 | 11.8 | 4.5 | 0.5 | 0.94 | 1000 | 8000 |
| 02280688 | • CL 8 | 7 | 8 | 15 | 15.5 | 4 | 0.6 | 0.74 | 1000 | 8000 |
| 02280784 | • • CL 10 | 8 | 9 | 16 | 15.7 | 5 | 0.6 | 1.05 | 1000 | 8000 |
Brochure-CL.pdf
Download
|
Other products that may interest you