TAS-DME expansion anchor hook
Steel
This fastener works in the same way as expansion anchor bolts. It is necessary to drill a hole in the base material where the anchor hook will be fixed. When the hook is tightened the body of the anchor expands and presses firmly against the inside of the drill hole. The hook can then be used to hang the element to be fastened.
What material do you need?
Technical info for combination: Steel
Material:
Hook, nut, washer, cone nut and sleeve: Carbon steel
Plastic ring: Red nylon
All references for combination: Steel
| Part number | M x L Dimension | Ø Drill mm | Tightening Torque Nm | Box Quantity | Outer Box Quantity |
|---|---|---|---|---|---|
| 09108290 | 6 x 45 | 8 | 15 | 150 | 150 |
| 09108151 | 6 x 45 | 9 | 15 | 150 | 150 |
| 09108240 | 8 x 60 | 10 | 25 | 50 | 50 |
| 09108160 | 8 x 60 | 11 | 25 | 50 | 50 |
| 09108305 | 10 x 70 | 12 | 35 | 50 | 50 |
| 09108349 | 10 x 70 | 14 | 35 | 50 | 50 |
| 09108313 | 12 x 80 | 16 | 50 | 25 | 25 |
Brochure-DMEG.pdf
Download
|
Other products that may interest you