Nylon wall plug with washer
The standard nylon wall plug with rim is intended for light-duty fixings in solid substrates where insertion depth needs to be controlled. Its integral rim acts as a stop at the entrance to the drilled hole, helping prevent the plug from being pushed too far into the material.
The polyamide 6 (PA6) body has lateral anti-rotation fins and a service temperature range of −40 °C to +70 °C. It is suitable for concrete, solid brick, natural stone and sandstone, using the screw diameter specified for each product reference.
Benefits:
- Insertion stop: The rim keeps the end of the plug at the hole entrance and helps with positioning.
- Controlled screw installation: Lateral fins help prevent the plug from turning with the screw.
- Size selection: The available sizes allow the plug and screw combination to be matched to the light-duty fixing.
Product characteristics
Material:
Polyamide 6 (PA6)
Application:
Concrete, brick, natural stone, sand stone
| Part number | Ø Dimension D x L | Ø D Drill | L Length | h1 min. Depth | Ø Screw Application | Kn Load Recommended | Box Quantity | Outer Box Quantity |
|---|---|---|---|---|---|---|---|---|
| 09110110 | 4 x 20 | 4 | 20 | 25 | 2 - 3 | 0.13 | 200 | 42000 |
| 09110129 | 5 x 25 | 5 | 25 | 30 | 2,5 - 4 | 0.32 | 200 | 42000 |
| 09110137 | 6 x 30 | 6 | 30 | 35 | 3,5 - 5 | 0.53 | 100 | 21000 |
| 09110145 | 7 x 35 | 7 | 35 | 40 | 4 - 5,5 | 0.65 | 100 | 10500 |
| 09110153 | 8 x 40 | 8 | 40 | 45 | 4,5 - 6 | 0.75 | 100 | 10500 |
| 09110161 | 10 x 50 | 10 | 50 | 55 | 6 - 8 | 0.92 | 50 | 5250 |
| 09110188 | 12 x 60 | 12 | 60 | 65 | 8 - 10 | 1.33 | 25 | 2625 |
| 09110196 | 14 x 75 | 14 | 75 | 80 | 10 - 12 | 1.76 | 20 | 2100 |
| 09110209 | 16 x 90 | 16 | 90 | 95 | 12 | 2.9 | 10 | 1050 |
Brochure-TPSA.pdf
Download
|
Other products that may interest you