DIN 580 lifting eye bolt

Stainless steel AISI 304

The DIN 580 AISI 304 (A2) stainless steel eye bolt is a male lifting eye designed for equipment used outdoors or in damp areas, such as pumps, motors, electrical cabinets, HVAC units or machinery that is washed frequently. It is manufactured to DIN 580 in M6 to M24 threads.

AISI 304 is the general-purpose stainless steel used across industry: it withstands moisture, condensation and washing with water. It is the right choice when zinc plating falls short and the environment has no significant chloride exposure.

*Tip: Before each lift, check that the base of the eye bolt sits fully on the component.

Benefits:

Moisture resistant: Retains its corrosion resistance on equipment exposed to rain, condensation or frequent washing.
Easy to clean: The stainless finish makes cleaning easier in areas where hygiene is required.
Compatible with stainless equipment: Integrates into stainless steel equipment and structures without mixing materials.

The DIN 580 zinc-plated steel eye bolt is a male lifting eye that screws into a tapped hole to create a lifting point on housings, tooling, motors and machinery assemblies. Manufactured to DIN 580, it offers the widest size range: M6 to M48, with a working load limit (WLL) in axial pull from 75 kg to 8,600 kg.

The zinc coating protects the steel surface against corrosion, making it suitable for indoor use and dry or mildly corrosive environments.

*Tip: The WLL shown is for vertical pull; if the load works at an angle, capacity is reduced.

Benefits:

High load capacity: Up to 8,600 kg WLL in axial pull in the largest sizes.
Widest thread range: From M6 to M48, for small parts and heavy equipment.
Direct mounting: The male threaded shank screws straight into the component's tapped hole, with no additional parts.

The DIN 580 AISI 316 (A4) stainless steel eye bolt is the male lifting eye for chloride-containing environments, such as coastal areas, installations exposed to salt water or processes involving chlorinated cleaning. Manufactured to DIN 580, it is available from M6 to M24 with an axial WLL from 75 kg to 1,800 kg.

The molybdenum in the alloy improves resistance to pitting corrosion compared with AISI 304. This type of corrosion is typical of environments containing salt or chlorine.

*Tip: Inspect the eye and thread regularly, and replace the eye bolt if it shows deformation or pitting.

Benefits:

Pitting resistance: AISI 316 withstands chlorides better than AISI 304.
For aggressive environments: Recommended where A2 may not be sufficient, such as coastal outdoor sites or wash-down areas using chlorinated products.
Up to 1,800 kg WLL: In axial pull, in M6 to M24 threads.

What material do you need?

Stainless steel AISI 304

Stainless steel AISI 316

Steel

Material:
Stainless steel AISI 304

Part number	Medida rosca d1	Denomination	d2	d3	d4	n	L	e	K	m	Box Quantity	Outer Box Quantity
09525181	M6	A2 AMI 106	28	16,5	16,5	29	11	6	6	10	10	160
09525183	M8	A2 AMI 108	35	20	19	34	13	6	7	10	10	160
09525185	M10	A2 AMI 110	44	25	24	43	17	8	9	12	10	80
09525187	M12	A2 AMI 112	53	30	29	52	20	10	11,3	14	5	40
09525189	M14	A2 AMI 114	54	30	29	53	20	11	12	14	5	40
09525191	M16	A2 AMI 116	62	35	33,5	60	26	12	13	16	1	16
09525193	M18	A2 AMI 118	71	40	40	71	30	14	16	18	1	16
09525195	M20	A2 AMI 120	70	40	39	70	30	14	15,3	19	1	16
09525197	M24	A2 AMI 124	88	50	49	89	35	18,5	19	24	1	8

Part number	Medida rosca d1	Denomination	d2	d3	d4	n	L	K	m	e	Working Load Axial - W.L.L (kg)	Box Quantity	Outer Box Quantity
09522613	M6	AEM106	36	20	20	36,0	13,0	8,0	10	4,6	75	100	400
09522621	M8	AEM108	36	20	20	36,0	13,0	8,0	10	6,0	140	100	400
09522630	M10	AEM110	45	25	25	45,0	17,0	10,0	12	7,7	230	100	300
09522648	M12	AEM112	54	30	30	53,0	20,5	12,0	14	9,4	340	50	150
09522656	M14	AEM114	63	35	35	62,0	27,0	14,0	16	11,3	490	50	50
09522664	M16	AEM116	63	35	35	62,0	27,0	14,0	16	13,0	700	50	50
09522672	M18	AEM118	72	40	40	71,0	30,0	16,0	19	15,0	850	50	50
09522680	M20	AEM120	72	40	40	71,0	30,0	16,0	19	16,5	1.200	25	25
09522699	M22	AEM122	81	45	45	80.5	35,0	18,0	21	18,5	1.400	25	25
09522701	M24	AEM124	90	50	50	90,0	36,0	20,0	24	19,6	1.800	25	25
09522710	M27	AEM127	96	53	55	97,0	39,0	21,5	25	22,6	2.100	10	10
09522728	M30	AEM130	108	60	65	109,0	45,0	24,0	28	25,0	3.200	10	10
09522736	M33	AEM133	108	60	65	109,0	45,0	24,0	28	28,0	3.200	1	4
09522744	M36	AEM136	126	70	75	128,0	54,0	28,0	32	30,3	4.600	1	4
09522752	M42	AEM142	144	80	85	147,0	63,0	32,0	38	35,6	6.300	1	2
09522760	M48	AEM148	166	90	100	168,0	68,0	38,0	46	41,0	8.600	1	1

Part number	Medida rosca d1	Denomination	d2	d3	d4	n	L	e	K	m	Working Load Axial - W.L.L (kg)	Box Quantity	Outer Box Quantity
09525099	M6	AMI106	28	16,5	16,5	29	11	6,0	6,0	10	75	10	160
09525101	M8	AMI108	35	20,0	19,0	34	13	6,0	7,0	10	140	10	160
09525110	M10	AMI110	44	25,0	24,0	43	17	8,0	9,0	12	230	10	80
09525128	M12	AMI112	53	30,0	29,0	52	20	10,0	11,3	14	340	5	40
09525136	M14	AMI114	54	30,0	29,0	53	20	11,0	12,0	14	490	5	40
09525144	M16	AMI116	62	35,0	33,5	60	26	12,0	13,0	16	700	1	16
09525145	M18	AMI118	71	40,0	40,0	71	30	14,0	16,0	18	850	1	16
09525152	M20	AMI120	70	40,0	39,0	70	30	14,0	15,3	19	1.200	1	16
09525160	M24	AMI124	88	50,0	49,0	89	35	18,5	19,0	24	1.800	1	8

Other products that may interest you

NEW IN A2

DIN 582 lifting eye nut

NEW PRODUCT

DIN EN 13411-5 Type 1 Heavy-duty Wire Rope Clip (DIN 1142)

DIN 741 wire rope clip

Wire rope clip U.S. type

DIN 1480 turnbuckles, hook/eye

D-Shackles

DIN 11024 R-clip

Center axle pin

Linchpin DIN 11023

Wire rope gripper UNILOQ

DIN 6899/A wire rope thimble

Round wire rope thimbles

S-hooks

Welded ring

Double swivel shackle

Twisted shackles

Turnbuckle threaded rod end piece

Long eye bolt with washer and nut

Turnbuckle eye end piece

Turnbuckle jaw end piece

Lifting hook with lock

Din 689 lifting hook with safety latch

Carbon steel lifting hook with safety latch

Alloy steel lifting hook with safety latch

Connecting links

Swivel hook with safety latch

Grade 80 eye self-locking hook

Grade 80 clevis self-locking hook

Grade 80 swivel self locking hook

Oblong master link

Master link assembly

DIN 3093 Aluminium ferrule

Simple wire rope clip

Double wire rope clip

Oval wire rope clip

Wire-stretcher

DIN 1480 turnbuckles, hook/hook

DIN 1480 turnbuckles, eye/eye

DIN 1478 turnbuckle jaw/jaw

DIN 1480 turnbuckle welding rod

DIN 1480 turnbuckle jaw/eye

DIN 1478 closed body turnbuckle hook/eye

DIN 1478 closed body turnbuckle hook/hook

DIN 1478 closed body turnbuckle eye/eye

DIN 1478 closed body turnbuckle jaw/jaw

DIN 1480 turnbuckle body

Hook for DIN 1480 turnbuckle

Eye for DIN 1480 turnbuckle

Welding rod

Oval lifting eye nut

Eye/eye swivel

D-shackles, square-head

D-Shackle heavy-duty

Heavy-duty d-type shackle with nut and cotter pin

Trawling d-shackle square head

Trawling d-shackle socket head

Bow shackles

Bow shackle square head

Bow shackle heavy-duty

Heavy-duty bow shackle with nut and cotter pin

Snap hook DIN 5299

DIN 5299 snap hook with safety latch

Quick links

DIN 580 lifting eye bolt

Stainless steel AISI 304

Technical info for combination: Stainless steel AISI 304

All references for combination: Stainless steel AISI 304