Search
en

Uniq

Rigging hardware

Heavy-duty bow shackle with nut and cotter pin

Play 360

Each shackle is marked with its size and its working load in tonnes, guaranteeing the correct choice and, therefore, increasing safety. The widening of the bow makes it easier to accommodate the sling or hook of choice, and can improve mobility if necessary. The hex-head screw with nut and pin, which acts as a bolt increases the required safety level.

TIPS: For correct assembly, the hook must always be attached to the shackle bolt and the sling, the wire or rope must be attached to the shackle bow. Assembly must never be carried out in reverse order. Although lateral loads must be avoided, it allows for special applications at 45° and 90°. The following SWL load reductions must be taken into account for these cases: 45° reduction to 70 % and 90° reduction to 50 %. In order not to compromise safety, the SWL established for each size must never be exceeded.

Product characteristics

Heavy-duty bow shackle with nut and cotter pin

Material:
High resistance steel
Body: Steel C45
Shackle bolt: Alloy steel

Finish:
Body: Galvanized
Shackle bolt: Red

Part number Nominal Dimension (mm) Denomination B D d H Ø C Working Load W.L.L (kg)Box Quantity Outer Box Quantity
09528337 5 GLART105 9.53 6.35 4.76 22.23 17.46 14.29 330 50 400
09528345 6 GLART106 12.7 7.94 6.35 28.58 19.84 17.46 500 50 200
09528353 8 GLART108 13.49 9.53 7.94 30.96 21.43 20.64 750 50 50
09528361 10 GLART110 16.67 11.11 9.53 36.51 26.19 24.61 1000 50 50
09528370 12 GLART112 20.64 15.88 12.7 47.63 33.34 30.16 2000 25 25
09528388 16 GLART116 26.99 19.05 15.88 60.33 42.86 39.69 3250 10 10
09528396 19 GLART119 31.75 22.23 19.05 71.44 50.8 47.63 4750 5 5
Brochure-GLART.pdf
Download |
Other products that may interest you