Search
en

Uniq

Rigging hardware

DIN 582 lifting eye nut

Stainless steel AISI 304

The DIN 582 AISI 304 (A2) stainless steel eye nut is the female lifting eye for installations exposed to chlorides, such as coastal environments or areas with chlorinated cleaning. Manufactured to DIN 582, it is available from M6 to M24 with an axial WLL from 75 kg to 1,800 kg.

Thanks to its molybdenum content, AISI 316 withstands the pitting caused by salt and chlorine better than AISI 304. To keep that resistance across the whole assembly, the stud or bolt it is mounted on must also be suited to the same environment.

*Tip: When removing it, also check the stud thread: in chloride environments, pitting can appear on both parts.

Benefits:

  • Molybdenum alloy: Better pitting resistance than AISI 304 in salty or chlorinated environments.
  • For exposed assemblies: The alternative when A2 may fall short against corrosive agents.
  • Up to 1,800 kg WLL: Axial capacity on M6 to M24 studs.
What material do you need?

Technical info for combination: Stainless steel AISI 304

Dimensioned technical drawing of the DIN 582 AISI 304 (A2) stainless steel eye nut (female lifting eye)

Material:
Stainless steel AISI 304

All references for combination: Stainless steel AISI 304

Part number Medida rosca d1Denomination d2 d3 d4 n e K m Working Load Axial - W.L.L (kg)Box Quantity Outer Box Quantity
09525199 M6 A2 AHI 106 27 16,5 16,5 28 6 6 8 10 160
09525200 M8 A2 AHI 108 35 20 19 33 8,5 7,3 10 10 160
09525201 M10 A2 AHI 110 44 25 24 42 10 9,2 10,5 10 160
09525202 M12 A2 AHI 112 53 30 29 51 11 11,3 12,5 5 80
09525203 M14 A2 AHI 114 54 30 29 53 11 12 14 5 40
09525204 M16 A2 AHI 116 62 35 34 60 13 13,3 15 1 16
09525205 M18 A2 AHI 118 71 39 39 71 14 16,5 18 1 16
09525206 M20 A2 AHI 120 70 40 39 68,5 15 15,3 18 1 16
09525207 M24 A2 AHI 124 88,5 50 49 88,5 20 19 22 1 8
Other products that may interest you